

--------------------------------------------------------------------------------

Command: run Delft3D-WAVE
   Starting Delft3D-WAVE computation ...
--------------------------------------------------------------------------------
-  Delft3D
-  Deltares, Delft3D-WAVE Version 3.05.02.6864, Dec 12 2016, 20:13:47
-  Open source
-
--------------------------------------------------------------------------------
*** MESSAGE: Delft3D-WAVE runs stand alone
 Done reading input
  Initialising grids and grid mappings
 
Coordinate System: Spherical
 
  Start loop over SWAN grids, time =           0.000
  Allocate input fields
  Allocate and read SWAN depth
  Write SWAN depth file
  Deallocate input fields
  Write SWAN input
*** MESSAGE: 'myfirstwavemodel' is truncated to 'myfirstw' in SWAN input file
<<Run SWAN...
SWAN batchfile executed for Delft3D
Using swan.bat in directory C:\Program Files\Deltares\Delft3D 4.02.03\win64\swan\scripts\
Using C:\Program Files\Deltares\Delft3D 4.02.03\\win64\swan\bin\swan_4072ABCDE_del_w64_i11_omp.exe
Performing wave computation for: myfirstwavemodel.swn
        1 file(s) copied.

 SWAN is preparing computation

 Number of threads during execution of parallel region =  8

 iteration    1; sweep 1
+iteration    1; sweep 2
+iteration    1; sweep 3
+iteration    1; sweep 4
 accuracy OK in   1.70 % of wet grid points ( 98.00 % required)

 iteration    2; sweep 1
+iteration    2; sweep 2
+iteration    2; sweep 3
+iteration    2; sweep 4
 accuracy OK in  62.20 % of wet grid points ( 98.00 % required)

 iteration    3; sweep 1
+iteration    3; sweep 2
+iteration    3; sweep 3
+iteration    3; sweep 4
 accuracy OK in  86.48 % of wet grid points ( 98.00 % required)

 iteration    4; sweep 1
+iteration    4; sweep 2
+iteration    4; sweep 3
+iteration    4; sweep 4
 accuracy OK in  95.43 % of wet grid points ( 98.00 % required)

 iteration    5; sweep 1
+iteration    5; sweep 2
+iteration    5; sweep 3
+iteration    5; sweep 4
 accuracy OK in  97.19 % of wet grid points ( 98.00 % required)

 iteration    6; sweep 1
+iteration    6; sweep 2
+iteration    6; sweep 3
+iteration    6; sweep 4
 accuracy OK in  97.47 % of wet grid points ( 98.00 % required)

 iteration    7; sweep 1
+iteration    7; sweep 2
+iteration    7; sweep 3
+iteration    7; sweep 4
 accuracy OK in  98.78 % of wet grid points ( 98.00 % required)

+SWAN is processing output request    1
+SWAN is processing output request    2
        1 file(s) copied.

D:\Teaching\Module 7\2019-2020\Regional modeling\SWAN_exercise_modelsetup>rem exit 
>>...End of SWAN run
  Allocate output fields
  Read SWAN output
  WARNING: Found negative value(s) for dissip(2) in swanout file;
           value(s) set to zero
  Write WAVE map file, nest          1 time           0.000
  Time written          0
Delft3D-WAVE finished normally.
